Install SDK Jetson components

From Take-Air Wiki
Revision as of 22:50, 29 October 2021 by Alexis.Tantot (talk | contribs) (Created page with "{| class="wikitable" |- | '''Tested in the following environments''' |- | Ubuntu 18.04 LTS |- | Ubuntu 18.04 LTS in VMware Workstation 16 Player on Windows 10 |- | Ubuntu 18.0...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Tested in the following environments
Ubuntu 18.04 LTS
Ubuntu 18.04 LTS in VMware Workstation 16 Player on Windows 10
Ubuntu 18.04 LTS in VirtualBox 6.1.26_Ubuntu r145957 on Ubuntu 20.04 LTS
  1. Power the Open.OC 2 board. If you don't know its IP address, connect it to your computer using the USB cable (connected on USB-0 of Open.OC 2).
  2. Start the NVIDIA SDK Manager on your computer.
  3. In Step 1 of SDK Manager, use the same configuration as before: Jetson Nano as the Target Hardware and JetPack 4.6(rev.2) as the Target Operation System. It should look like below:
    Sdk config step1.png
  4. Press "CONTINUE"
  5. In Step 2 of SDK Manager, uncheck "Jetson OS" to keep only "Jetson SDK components". Accept the terms and conditions. It should look like below:
    Sdk config step2 SDKonly.png
  6. Press "CONTINUE"
  7. If you know the IP address of Open.OC 2, you can choose Ethernet and type the IP address. If you don't know its IP address, you can choose USB. In any case, type the username and password.
    Connection Ethernet
    Connection USB
  8. Press Install.
Retrieved from "https://docs.takeairrobotics.com/index.php?title=Install_SDK_Jetson_components&oldid=390"